Materials

materials-group

KeysSplint Soft

KeySplint Soft is fully biocompatible and is in compliance with international medical device regulations and standards. Its robust formulation has three years of guaranteed shelf life, is colour stable, and is validated in multiple open-source printers. No other dental splint resin can deliver the quality and performance of KeySplint Soft.

  • Biocompatible
  • Transparent
  • Polishable
  • Stain-resistant

flexcera-base

Flexcera™ Base

FDA cleared premium denture bases

Light-curable resin for the fabrication of high-impact and removable denture bases. Compatible and validated for use with EnvisionTEC™ systems.

  • Digital Denture Base

flexcera-base

Flexcera™ Smile

Premium denture teeth

Light-curable resin for the fabrication of high-impact artificial teeth with variable translucency for dentures. Compatible and validated for use with EnvisionTEC™ systems.

  • Digital Denture Teeth

flexcera-smile

Flexcera™ Smile Ultra+ (Coming Soon)

For permanent, printable smiles

A next-generation hybrid nanoceramic resin FDA 510(k) Class 2 cleared for a wide range of permanent and temporary dental restorations.

  • Teeth for dentures
  • Crowns
  • Inlays
  • Onlays
  • Bridges
  • Veneers
  • Monolithic full and partial dentures

Flexcera-smile-ultra

Model X

Premium meets precision

Model X with its 50-micron build layer allows for exceptionally detailed crowns, bridges with removable dies, implant cases and diagnostic and orthodontic models. Model X resin is formulated to print accurate and highly defined models. With its 50-micron build layer, it produces a precision fit and smooth finish. Model X provides exceptionally detailed crowns with removable dies, bridges, implant cases, and diagnostic and orthodontic models.

  • Crown and bridge with removable dies
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models

Print high-accuracy crowns with removable dies for less than $3/model

Flexural strength: 90 MPa

Flexural modulus: 2.5 GPa

Elongation at break: 10%

Model-x

Model Z

For high speed when you need it most

Model Z is as effective as it is zoom fast. This low viscosity model material is ideal for orthodontic, diagnostic, and crown and bridge models requiring smooth surface resolution, easy cleanup, and a superior fit and finish.

  • Crown and bridge models
  • Orthodontic models
  • Delete implant models
  • Clear aligner models
  • Diagnostic models

Print 6 models in 12 minutes for less than $2 per model

Flexural strength: 90 MPa

Flexural modulus: 2.5 GPa

Elongation at break: 10%

model-z

E-Guide

For the production of surgical drill guides

The E-Guide is a biocompatible certified Class I material, developed for the production of high-precision surgical drill guides for use in implant surgery. The results produced by combining E-Guide with EnvisionTEC technology are superior to traditional methods of manufacturing implant placement guides.

  • Surgical guides
  • Pilot drill guides
  • Drilling templates
  • Device sizing templates

e-guide

E-Tray

For the production of custom dental trays to obtain dental impressions

E-Tray is a 3D printing material for use in producing individually customized impression trays. Dental impressions can be used for preliminary impressions, final impressions, and bite registrations, and are used for prosthodontics, orthodontics, dental crown and bridges, maxillofacial prosthetics, oral and maxillofacial surgery, in diagnosis, mouth guards, whitening trays, and for permanent dental record to document before and after phases.

  • Custom impression trays

e-tray

E-Guard

A biocompatible transparent material for the production of accurate orthodontic bite splints and night guards

The results produced by combining E-Guard with EnvisionTEC technology are superior to traditional methods of manufacturing bite guards and night guards. It is a clear material, allowing for maximum visibility.

  • Night guards
  • Occlusal guards
  • Snoring appliances
  • Bite splints
  • Bite planes

e-guard

E-Model HS

For use in producing orthodontic arch models extremely quickly

E-Model HS is ideal for orthodontic applications when using a thermoforming technique to produce clear aligners. With the ability to print up to 120 mm/hour, this material is the fastest-printing resin on the market today. This material produces models with high accuracy and an exceptional surface finish for a perfect fit.

  • Thermoforming models
  • Clear aligner models
  • Orthodontic appliance models
  • Diagnostic models

e-model-hs

E-Denstone

For the rapid production of highly accurate, scannable dental models

With a look and feel similar to traditional gypsum models, E-Denstone delivers a matte finish, which assists in accurate scanning for verification purposes. This material allows the user to die trim, margin mark with a red pencil and hand wax to the die without concern over layer lines. Die paint sticks to the dies just like a plaster and won’t peel off.

  • Crown and bridges models
  • Mounting casts
  • Counter models
  • Casting partials
  • Denture repairs

e-denstone

Press-E-Cast

Can be pressed into full-contour ceramics

A wax-filled photopolymer material for the production of full anatomical crowns and bridges with extreme dimensional accuracy in X, Y and Z, as well as exceptional surface finish. The burnout for parts 3D printed in Press-E-Cast is rapid, clean and ash-free, resulting in accurate, quality castings. With a moderate wax content, Press-E-Cast also delivers low thermal expansion during burnout. Details on casting Press-E-Cast can be found in this Best Practices document.

  • Crown and bridge wax-ups
  • Pressing and casting full contour crowns
  • Casting copings and substructures
  • Casting removable partial denture frameworks

press-e-cast

E-Aqua Model

The low viscosity of the liquid material allows for quick and easy cleanup of the models

E-AquaModel printing material for DLP and cDLM 3D printers is the perfect choice high-accuracy orthodontic models AND allows for the first environmentally friendly cleaning process using only water. A high green strength gives E-AquaModel added strength and stability during the build, resulting in lower shrinkage and curling than similar products. The low viscosity of the liquid material allows for quick and easy cleanup of the models without the need to use alcohol.

  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models

e-aquamodel

E-Partial

An accurate material for dental modelmaking and clear aligner production

A castable material developed for a specific need in the dental industry: delivering delicate partial frameworks with thin features and some flexibility. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for the production of a very hard retention grid and super-tight thin clasps to deliver a metal partial with the perfect fit every time.

  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models

e-partial

E-Orthoshape

Produces extremely detailed models, with exceptional surface finish

E-OrthoShape is a grey ABS-like material that prints in 100-micron layers. It is recommended for the affordable volume production of models on which to produce clear thermoformed aligners by orthodontic professionals.

  • Crown and bridge models
  • Orthodontic models
  • Implant models
  • Clear aligner models
  • Diagnostic models

e-orthoshape